Can you hook up 2 subs to a mono amp

can you hook up 2 subs to a mono amp

Can you wire a mono amp to run two subs?

If you want your mono amp to run at 1 ohm, you can wire 2 subs, but you have less options. For this you can only run 2 x 2 ohm SVC subs, or 2 x 4-ohm DVC subwoofers. So, with that said, let’s look at the wiring for these set ups.

Can you use gain on a mono block AMP?

If the amp is a mono block then yes. There are two sets of terminals on the amp for added convenience. I use gain as a volume control. Its the Audioque 2200. Yes is mono and the second terminal isnt for a second channel only so you have more room to connect wires.

Can I wire a subwoofer to a second channel directly?

Yes is mono and the second terminal isnt for a second channel only so you have more room to connect wires. Im just wondering if it will pull the same resistance if it wire both parallel directly to it as it would if it wired sub 1 to sub 2 then to the amp.

Can I use a 2-channel amp for subs?

This is a great place to use a 2-channel amp. When you wire the subs as shown in the diagram below, the total impedance will be four ohms. A bridged 2-channel amp can provide plenty of power at a reasonable price. Get some good subs and a good amp and let it rip!

Can a mono amp run 2 subwoofers?

Most mono amps are 2 ohms or 1 ohm, and they’re designed specially to run a subwoofer, or 2, but they also need to be able to handle the total RMS. Running 2 subs adds a bit more complexity to the wiring and the math you need to do beforehand, but as you know it can be done.

Can you run two subwoofers in a car stereo?

If your amplifier can handle the total RMS of 2 subs, wiring them to a mono amp can be done, allowing you to double the bass reproduction of your car stereo system. Running 2 subwoofers isn’t for everyone, of course, but if you really want that extra bass, it will shake the car seat you spend so much time in and turn heads as you drive by.

Can I wire a subwoofer to a second channel directly?

Yes is mono and the second terminal isnt for a second channel only so you have more room to connect wires. Im just wondering if it will pull the same resistance if it wire both parallel directly to it as it would if it wired sub 1 to sub 2 then to the amp.

What size amplifier do I need for two 300W subwoofers?

So, if you’re wanting to wire 2 300W subs to a mono amp, your amplifier should be at the very least 600W RMS. Also, remember if you’re changing the impedance of your subs, the RMS of your amp will change, too. Impedance of the subwoofer load helps the amplifier determine how much of a power load the subs can handle.

How to connect a subwoofer to a 2 channel stereo amplifier?

We have two different ways to connect a subwoofer output to a 2-channel stereo amplifier. We will describe both. First of all, figure out all the connecting ports (input and output) of both of the devices. Find out the speaker wire that’s given with either the sub or the speaker. Connect two of these using that speaker wire.

What is the best subwoofer for 2 channel music?

JL Audio has a great sub, but for 2 channel music, JLs are an earthquake, and RELs are a part of your speakers, and they dont let themselves overpower the speakers. Take for example.... Revel Ultima Salon 2s.

What can I do with a bridged 2 channel amp?

This is a perfect place for a 2-channel amp. By bridging the output of the amp, youll get lots of power for a relatively low cost. Avoid using a mono amp here — they work best at a lower impedance than 4 ohms. A single 4-ohm SVC sub, connected to a bridged 2-channel amp.

How do I choose the right amp for my subwoofer?

When choosing an amplifier, the most important thing is to pick one with the right amount of power for your subs. Once youve decided how much power you need, youll need to decide which type of amp to use. For most bass systems, youll want to choose either a mono (single-channel) amp or a 2-channel amp.

Related posts: